Are you wondering why your Netgear WiFi range extender’s network name is not showing up? Are you looking for troubleshooting steps to get this issue fixed? You have reached the right page. You will find the correct instructions for fixing the network name netgear_ext not detectable issue. But what could be the reason that this issue occurred in the first place? Ranging from technical glitches to incorrect settings, there can be various reasons that can lead to this issue with your Netgear WiFi range extender. Simply follow the guidelines you find here and get rid of this problem in a jiffy.

Unable to Detect Netgear Extender SSID [Resolved]

Find below the reasons as well as the solutions to the problem with your Netgear extender.

Reason 1: Extender Not Broadcasting SSID

Solution: The very first reason that comes to mind is a glitch in the settings. Perhaps the settings have been changed which is why the network name is not shown on devices. So follow the steps mentioned below to tweak the settings that will help you enable the network name of the extender to be visible.

  • Power up your computer and access the Netgear extender login page using mywifiext.net.

  • Input the login credentials and log in to the extender GUI.

  • Get to WiFi settings and see if Enable 2.4GHz WiFi or Enable 5GHz WiFi and Broadcast this Network Name(SSID) are checked or not. If they are not checked then check them and click on the Save button.

Now your Netgear range extender network name should be detected on devices. However, if you are still struggling with the problem, then follow the hacks discussed ahead.

Reason 2: Technical Glitches

Solution: Power cycle the Netgear WiFi extender to eliminate the temporary technical glitches. Also, the extender needs to have some rest often. So to give the device some rest and fix technical glitches, go ahead and power cycle it. Powering it off and then powering it on after a while is what a simple power cycle process is all about. As soon as the extender is rebooted, check if the issue has been fixed.

Reason 3: Poor Power Supply

Solution: The Netgear range extender should be receiving an optimum power supply in order to perform well. However, if the power supply is poor you may experience certain issues. So, check the power socket that the extender’s power adapter is plugged into. Is it damaged? Yes? Plug the extender into some other well-working and non-damaged wall socket. Also, plug it in correctly. It should not be plugged loosely in any way.

Reason 4: Faulty Internet Connection

Solution: Check if the Netgear extender is connected to a stable internet network. There is a possibility that a faulty internet connection to the extender is the reason behind this issue. If the extender is connected to the router using a wireless connection, then try connecting them again. If they are connected using an Ethernet cable, then check the condition of the cable. Is it damaged or worn out? Replace the cable immediately. Also, ensure making a stable and firm connection between the extender and the host router.

Reason 5: Disabled WiFi

Solution: Perhaps the device that you are using to access the Netgear extender network has the WiFi option disabled. Get to its settings and enable the WiFi option and see if the issue gets fixed or not.

Reason 6: Excessive Extender- Router Distance

Solution: If the Netgear range extender is placed far away from the host router, then the extender would not be receiving the proper signal itself. So there is no point in extending the network. Thus bring the extender closer to the router and then try accessing its network by accessing its SSID. Is the issue still the same? Try the next hack.

Reason 7: Obsolete Firmware

Solution: There are chances that you haven’t updated your Netgear range extender for a long time. This might be the actual reason behind the network name not showing up issue. So access the extender management console by logging in and see if any firmware updates are ready to be installed. If you find any, then get your extender updated to the most recent version of the firmware. But while you are downloading the firmware file make sure that you download the correct file that is meant for your extender model only. For instance, if you have done a Netgear EX3700 setup at your home, then you need to download the firmware file which is meant for this extender model only. After downloading the file, get it installed on the extender.

In The Conclusion

To conclude this piece of write-up, we would say that the aforementioned troubleshooting hacks should be able to fix the issue that you are currently experiencing. Now onwards, make it a point that you always keep the firmware of your extender always updated to the latest version.