Want to access the Netgear router login page using routerlogin.net but are unable to do so? What could be the possible reason? It was working fine the last time but giving me trouble now. If the same thoughts are going around in your mind then we got your back. You got your hands on the correct post which is going to provide you with the correct answers to all your questions. You will also find the correct solution to the issue that you are currently stuck with. Just walk through the troubleshooting hacks mentioned in this article and get rid of the issue at hand.
Netgear Router Login Issues: Reasons
Using the wrong web address
Incorrect login credentials
Outdated web browser
Power power supply
Netgear Router Login Issues: Solutions
Solution 1: Reboot Netgear Router
To tackle the first reason in the above list, reboot the Netgear router. By this, you ditch away technical glitches with the router. To execute the router reboot process, power off your router by toggling the power button to the Off position and removing all the cables from it. After some time plug in all the cables as well as the power cable and turn its power button on. The moment the router is booted up, try accessing the Netgear router login page. If you still failed to do so get to the next hack.
Solution 2: Check Web Address
Now we eliminate the second reason. While accessing the login page, you need to enter the login web address. Are you typing the correct web address www.routerlogin.net in the URL bar of the browser? Even a minor typing mistake in the URL may take you to some wrong web page. So we recommend you type the URL carefully avoiding any typing mistakes. Refrain from typing it into the search bar of the browser. Use the URL bar instead.
Solution 3: Check Login Credentials
It is now time for reason no. 3. So, check the Netgear login username and password that you are using to log in to the router. Be sure that you are not making any typing errors while entering them in the respective fields. Check that the Caps Lock key is not enabled on the keyboard as the login credentials are case-sensitive.
Solution 4: Update Web Browser
An older version of the web browser can prevent you to log in to the router sometimes. Certain web pages do not get loaded on older versions of the browser. So consider updating the web browser that you are using to the latest version. For that, you need to get to the settings of the browser. With this, we covered reason 4 from the above list.
Solution 5: Check Internet Connection
Perhaps, the Netgear router is not connected to a stable internet source. If the connection between the router and the modem is not proper then you may experience login-related issues. Excessive distance between the router and modem and WiFi interference are yet another reasons for the poor network. Thus make sure that the router is connected to the modem properly. For minimum signal loss, consider using an Ethernet cable to connect the devices. Also, bring the router within the modem’s range. Once you are done with this, try accessing the router login page to log in to the Netgear router.
Solution 6: Fix Power Connection
To handle point no. 6 on the list, check the power adapter which is plugged into the power socket. It should be free of damage and plugged in correctly. Also, the power socket should be free of damage.
Solution 7: Update Firmware
Finally, we have come to reason 7 which is obsolete firmware. So you need to update the firmware on the router. But now you will ask how to update the firmware when you are not able to access the login page. Let us help you with this. You need to first reset the router to the factory settings and then log in using the default credentials. You can also setup router using the Nighthawk app. After you have completed the initial setup process, update the firmware on the router.
To Sum Up
Here comes an end to our helpful article about how to fix Netgear router login issues. We are pretty sure the troubleshooting hacks enlisted in this piece of write-up have proved to be useful to you.