Linksys Extender Firmware

Users who own Linksys wireless range extenders are well aware of the importance of doing Linksys extender firmware update. But, many of them have recently reported that they have been experiencing issues while trying to update the firmware of their devices simply because of the Linksys extender firmware update check error. Are you also facing the same issue? Well, know that whether you have done Linksys RE9000 setup or set up any other Linksys extender at your home, the troubleshooting hacks mentioned in this post will be of some help to you. Thus, continue reading.

[Fixed] Linksys Extender Firmware Update Check Error

  • Restart the Linksys Extender

Technical glitches are the number one reason why you are experiencing the Linksys extender firmware update check error. Thankfully, restarting your Linksys range extender will help to get rid of them. Therefore, waste no more to restart your device. Once done, check if the Linksys extender firmware update check error has bid adieu to you. 

  • Use the Correct Admin Details

If you are still struggling to make amends with the Linksys extender firmware update check error, then it might be because you have used incorrect login credentials to access the Linksys extender setup wizard. Thus, it is recommended that you make use of the correct admin password and username for the login process. As soon as that is done, try to update the firmware of your Linksys wireless range extender.

Did you still not get any luck this time? Well, it looks like there is some other reason behind the issue that you are experiencing. So, in order to figure that out, you need to keep reading this post. You will find definitely something to troubleshoot the issue at hand.

  • Enter the Right Model Number

Another reason why you are a victim of the Linksys extender firmware update check error is because you did not enter the correct model number in the field required while trying to perform Linksys extender firmware update. To rectify your mistake, make sure that you enter the model number of your device and not some other extender.

If you follow this hack with open eyes, then there is nothing that can stop you from fixing the Linksys extender firmware update check error.

  • Avoid Signal Interference

Check the location of your Linksys extender. Where is it placed exactly? Is it kept near cordless phones, treadmills, televisions, microwave ovens, and other smart home appliances? Well, you haven’t placed your extender at the right location. 

To take care of this thing, you need to change the location of your Linksys wireless range extender. Apart from keeping your extender away from these things, place it away from corners and thick concrete walls.

  • Perform Factory Default Reset

Although one of the aforementioned troubleshooting hacks will definitely help you to fix the Linksys extender firmware update check error, on the off chance, you are still stuck with the same issue, doing factory default reset is the right thing to do.

Right after you are done resetting your device, it is recommended that you set it up from scratch. In case you are wondering how to setup Linksys extender, then refer to the user manual that came along with your device.

Conclusion

With the last hack, we are wrapping up our guide written on how one can troubleshoot the Linksys extender firmware update check error. Hopefully, you will be able to get rid of it with one of the above-mentioned troubleshooting hacks.

What do you think about this article? Did you like reading it? Whatever your answer may be, do share it with your fellow readers via the comment section.